Products

Contact

RAD BUMPER SUITS : TOYOTA HILUX

Centre Radar & 4 Park sensors. 6 sensor models designed to reuse factory tow points.

  • Reuse factory Fog Lights
  • LED bar tabs 531mm hole centers for LED bar or spotlights
  • suits 7, 9inch spotlights or Stedi ST3K 21.5inch led bar
  • Full bumper replacement steel winch bar

Includes Winch Cradle – can suit up to 13,000lb Low mount Winch.

Includes

  • 3.5mm bash plate steel
  • LED Fog lights
  • Spotlight mounts
  • High Lift Jacking Points
  • Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced

RAD BUMPER SUITS : NEXT GEN FORD EVEREST

Centre Radar & Park sensors. Designed to reuse factory tow points.

  • LED bar tabs 531mm hole centres for LED bar or spotlights
  • suits 7, 9inch spotlights or Stedi ST3K 21.5inch led bar
  • t lights
  • Full bumper replacement steel winch bar

Includes WINCH CRADLE – Can suit up to 13,000lb Low mount Winch.

Includes

  • 3.5mm bash plate steel
  • LED Fog lights
  • Spotlight mounts
  • High Lift Jacking Points
  • Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced

ISUZU DMAX 2021 + RAD FRONT BULLBAR 3 LOOP F-I32-B

Full bumper replacement steel winch bar
WINCH CRADLE – Can suit up to 13,000lb Low mount Winch.

    Includes

    • Recovery Points
    • DRL indicators
    • LED fog lights
    • Hidden LED bar mounting behind mesh 21.5inch
    • Middle Bashplate 3.5mm bash plate steel
    • High Lift Jacking Points
    • Spotlight mounts

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced ADR69 compliant and airbag-compatible.

    RAD BUMPER SUITS : NEXT GEN FORD RANGER AND EVEREST with Centre Radar & Park sensors

    Designed to reuse factory tow points.

    • LED bar tabs 531mm hole centres for LED bar or spotlights
    • Suits 7, 9 inch spotlights or Stedi ST3K 21.5 inch LED bar
    • Reuse factory Fog Lights
    • Full bumper replacement steel winch bar

    Includes

    • WINCH CRADLE – Can suit up to 13,000lb Low mount Winch.
    • 3.5mm bash plate steel
    • LED Fog lights
    • Spotlight mounts
    • High Lift Jacking Points

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced

    TOYOTA HILUX 2021 ON RAD FRONT BULLBAR NO LOOP F-T08-A

    Full bumper replacement steel winch bar
    INCLUDES WINCH CRADLE – Can suit up to 13,000lb Low mount Winch.
    RED Shackles are not included & have been removed for ADR compliance and replaced with 4.75T recovery chassis mounted points.

    Includes

    • Chassis mounted 4.2T Recovery points included
    • 3.5mm bash plate steel
    • LED Fog lights
    • Spotlight mounts
    • High Lift Jacking Points

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced
    ADR69 compliant and airbag-compatible Tested by ASE Models with loop 50mm loop

    60kg with no loop
    73kg with loop and all accessories

    TOYOTA HILUX 2018-2021 RAD FRONT BULLBAR 3 LOOP F-T01-B

    Designed to fit 2018-2021 it will also fit 2021 Hilux. (2x 17mm holes required to be drilled)
    RED Shackles are not included & have been removed for ADR compliance and replaced with 4.75T recovery chassis mounted points.
    Full bumper replacement steel winch bar
    Includes WINCH CRADLE – Can suit up to 13,000lb Low mount Winch.

    Includes

    • Chassis mounted 4.2T Recovery points included
    • 3.5mm bash plate steel
    • LED Fog lights
    • Spotlight mounts
    • High Lift Jacking Points

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced
    ADR69 compliant and airbag compatible Tested by ASE
    Models with loop 50mm loop

    60kg with no loop
    73kg with loop and all accessories

    TOYOTA FORTUNER 2015-2020 RAD FRONT BULLBAR F-T03-A

    Full bumper replacement steel winch bar
    RED Shackles are not included & have been removed for ADR compliance and replaced with 4.75T recovery chassis mounted points.
    Includes WINCH CRADLE – Can suit up to 13,000lb Low mount Winch.

    Includes

    • Chassis mounted 4.2T Recovery points included
    • 3.5mm bash plate steel
    • LED Fog lights
    • Spotlight mounts
    • High Lift Jacking Points

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced
    ADR69 compliant and airbag compatible Tested by ASE
    NO LOOP VERSION ONLY

    TOYOTA LAND CRUISER LC 300 2023

    Material and Build Quality

    • Constructed from premium-grade steel for durability.
    • Powder-coated finish to withstand harsh environments.

    Design and Aesthetics

    • Bold and modern design that enhances the Land Cruiser’s imposing look.
    • Full-width bumper with integrated skid plate and grille guard.

    Functional Features

    • Winch Compatibility: Pre-drilled for seamless winch integration.
    • Spot Lights: Built-in mounts for spotlights and auxiliary lights.
    • Parking Sensors: Fully compatible with OEM parking sensors and safety systems.
    • Recovery Points: Reinforced recovery points for off-road recovery.
    • Ventilation: Enhanced airflow design to support engine cooling.

    Installation

    • Simple bolt-on installation with no need for drilling.
    • Maintains all factory-installed safety and sensor features.

    TOYOTA HILUX 2021 ON RAD FRONT BULLBAR F-T02-C

    Full bumper replacement steel winch bar with ABS components
    Include WINCH CRADLE – Can suit up to 12,000lb Low mount winches

    Includes

    • Chassis mounted 4.2T Recovery points included
    • 3.5mm bash plate steel
    • LED Fog lights
    • Spotlight mounts
    • High Lift Jacking Points

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced
    ADR69 compliant and airbag compatible Tested by ASE
    NO LOOP VERSION ONLY

    TOYOTA HILUX 2018 ON RAD FRONT BULLBAR NO LOOP F-T01-A

    Full bumper replacement steel winch bar
    Includes WINCH CRADLE – Can suit up to 13,000lb Low mount Winch.

    Includes

    • Chassis mounted 4.2T Recovery points included
    • 3.5mm bash plate steel
    • LED Fog lights
    • Spotlight mounts
    • High Lift Jacking Points

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced
    ADR69 compliant and airbag compatible Tested by ASE
    Models with loop 50mm loop

    60kg with no loop

    ISUZU DMAX 2021 + RAD FRONT BULLBAR NO LOOP F-I32-A

    Full bumper replacement steel winch bar
    Includes WINCH CRADLE – Can suit up to 13,000lb Low mount Winch.

    Includes

    • Chassis mounted 4.2T Recovery points included
    • 3.5mm bash plate steel
    • LED Fog lights
    • Spotlight mounts
    • High Lift Jacking Points

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced
    ADR69 compliant and airbag-compatible
    NO LOOP VERSION ONLY

    ISUZU MU-X 2021 + RAD FRONT BULLBAR NO LOOP F-I33-A

    Full bumper replacement steel winch bar
    Includes WINCH CRADLE – Can suit up to 13,000lb Low mount Winch.

    Includes

    • Chassis mounted 4.2T Recovery points included
    • 3.5mm bash plate steel
    • LED Fog lights
    • Spotlight mounts
    • High Lift Jacking Points

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced
    ADR69 compliant and airbag compatible Tested by ASE
    NO LOOP VERSION ONLY

    MAZDA BT50 RAD BULLBAR 2012-2020 NO LOOP 4.2T RECOVERY POINTS. F-Z50-A

    Full bumper replacement steel winch bar
    Includes WINCH CRADLE – Can suit up to 13,000lb Low mount Winch.
    RED Shackles are not included & have been removed for ADR compliance and replaced with 4.75T recovery chassis mounted points.

    Includes

    • Chassis mounted 4.2T Recovery points included
    • 3.5mm bash plate steel
    • LED Fog lights
    • Spotlight mounts
    • High Lift Jacking Points

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced
    ADR69 compliant and airbag compatible Tested by ASE
    Models with loop 50mm loop

    60kg with no loop
    73kg with loop and all accessories

    MITSUBISHI TRITON 2024 ON RAD FRONT BULLBAR NO LOOP

    Full bumper replacement steel winch bar
    Includes WINCH CRADLE – Can suit up to 13,000lb Low mount Winch.
    Reuses factory fog lights

    Includes

    • Chassis mounted 4.2T Recovery points included
    • 3.5mm bash plate steel
    • LED Fog lights
    • Spotlight mounts
    • High Lift Jacking Points

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced
    ADR69 compliant and airbag compatible.

    MITSUBISHI TRITON 2024 ON RAD FRONT BULLBAR LOOP

    Full bumper replacement steel winch bar
    Includes WINCH CRADLE – Can suit up to 13,000lb Low mount Winch.
    Reuses factory fog lights

    Includes

    • Chassis mounted 4.2T Recovery points included
    • 3.5mm bash plate steel
    • LED Fog lights
    • Spotlight mounts
    • High Lift Jacking Points

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced
    ADR69 compliant and airbag compatible.

    NISSAN NP300 2021 ON RAD FRONT BULLBAR

    Full bumper replacement steel winch bar with ABS components
    Includes WINCH CRADLE – Can suit up to 11,000lb Low mount Winch.

    RED Shackles are not included & have been removed for ADR compliance and replaced with 4.75T recovery chassis mounted points.
    Pathfinder grille not included.

    Includes

    • 3.5mm bash plate steel
    • LED Fog lights
    • Spotlight mounts

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced
    ADR69 compliant and airbag compatible Tested by ASE
    Models with loop 50mm loop

    60kg with no loop

    REAR BUMPER TO SUIT ISUZU MU-X RAD REAR BUMPER 2021 ON R-I33A

    The Rad Rear bumper (Thailand) with recovery points standard gives your car the best appearance and functionality.

    FEATURES

    • ADR Approved
    • ADR rated towbar
    • Manufactured from 3mm thick steel plate
    • Black powder-coated surface finishing
    • Two LED Licence Plate Lamps
    • Integrated step

    REAR BUMPER TO SUIT FORD RANGER NEXT GEN 2021 ON RAD REAR BUMPER R-F13-A

    The Rad Rear bumper (Thailand) with recovery points standard gives your car the best appearance and functionality.

    FEATURES

    • ADR Approved
    • ADR rated towbar
    • Manufactured from 3mm thick steel plate
    • Black powder-coated surface finishing
    • Two LED Licence Plate Lamps
    • Integrated step

    REAR BUMPER TO SUIT ISUZU DMAX RAD REAR BUMPER 2021 ON R-I31-A

    The Rad Rear bumper (Thailand) with recovery points standard gives your car the best appearance and functionality.

    FEATURES

    • ADR Approved
    • ADR rated towbar
    • Manufactured from 3mm thick steel plate
    • Black powder-coated surface finishing
    • Two LED Licence Plate Lamps
    • Integrated step

    REAR BUMPER TO SUIT FORD RAPTOR RANGER RAD REAR BUMPER R-F12-A

    The Rad Rear bumper (Thailand) with recovery points standard gives your car the best appearance and functionality.

    FEATURES

    • ADR Approved
    • ADR rated towbar
    • Manufactured from 3mm thick steel plate
    • Black powder-coated surface finishing
    • Two LED Licence Plate Lamps
    • Integrated step

    REAR BUMPER TO SUIT TOYOTA HILUX 2005-2020 RAD REAR BUMPER R-T01-A

    The Rad Rear bumper (Thailand) with recovery points standard gives your car the best appearance and functionality.

    FEATURES

    • ADR Approved
    • ADR rated towbar
    • Manufactured from 3mm thick steel plate
    • Black powder-coated surface finishing
    • Two LED Licence Plate Lamps
    • Integrated step

    REAR BUMPER TO SUIT TOYOTA HILUX 2021 ON RAD REAR BUMPER R-T02-C

    The Rad Rear bumper (Thailand) with recovery points standard gives your car the best appearance and functionality.

    FEATURES

    • ADR Approved
    • ADR rated towbar
    • Manufactured from 3mm thick steel plate
    • Black powder-coated surface finishing
    • Two LED Licence Plate Lamps
    • Integrated step

    FRONT RAD WIDE BODY HILUX RAPTOR KIT FRONT ONLY

    KIT DOES NOT COME PAINTED
    KIT REQUIRES PROFESSIONAL INSTALLATION
    PANELS ARE REPLACED, PANELS ARE ADDED. HIGH SKILL LEVEL REQUIRED.
    Pathfinder

    1. Bonnet scoop
    2. Front fenders primed R/L
    3. Front bumper
    4. Front grille
    5. BAR

    Includes WINCH CRADLE – Can suit up to 13,000lb Low mount Winch.

    Includes

    • 3.5mm bash plate steel
    • LED Fog lights
    • Spotlight mounts
    • High Lift Jacking Points

    Made from 5mm steel main winch cradle & bar centre + 3mm side wings reinforced
    ADR69 compliant and airbag compatible Tested by ASE

    RAD ROOF SCOOP WITH LED ABS SUITS HILUX ROOF

    ABS PLASTIC
    COMES IN PRIMER
    Includes LED NO WIRING
    Roof cover scoop including 60w x 2

    THE RAD TUB LED

    RACK is perfect for carrying your Max Tracks, shovel, Hi-Lift Jack, or whatever. Or a suitable mount for your rooftop tent.
    This Tub rack is fully adjustable to suit most Utes with a tub width of 1438mm up to 1650mm
    Rack sits 270mm above top of Ute sides. This height is great for keeping your rooftop tent low to reduce wind drag.
    HOLDS 4X FLUSH LED WORK LIGHTS

    Benefits

    • Mount multiple accessories on the sides of this rack like Tred Boards, Max Trax, Axes, shovels, Hi-Lift Jacks, Farm Jacks, etc.
    • Platform for rooftop tent
    • You can mount a 1200mm roof rack to it.

    Features

    • Zinc plated then powder coated matte black
    • Adjustable width from 1438mm to 1650mm between tub width
    • Adjustable high off top of tub
    • Multiple locations for mounting accessories on top and the sides
    • Simple bolt together design
    • Requires drilling into tub
    • Rated to 200kg driving and 400kg sitting still

    Included in box

    • Full tub rack and bolts.
    • Lights not included. Unless purchased separately
    • Install time 2-3 hours

    RAD BUMPER THAILAND

    65/3 Moo. 5, Bueng Kham Phoi,
    Lam Luk Ka, Pathum Thani 12150

    w

    Phone

    09 8965 2892

    Email

    Sales@radbumper.com